![background image](http://html1.mh-extra.com/html/zelmer/je1200-5/je1200-5_user-manual_3344776103.webp)
107
JE1200-002_v03
Maintenance and operation
Put the ingredients into a container of grinder.
●
Do not exceed the maximum level of content,
as it is marked on the grinder container.
1
Put and tighten the basis of grinder with a set of blades
grinder on the thread of the container of grinder.
2
Turn the grinder upside down and place it on the base for
accessories.
3
Block the grinder by turning it clockwise until it locks (the
characteristic “click” indicates that the grinder is correctly
installed).
Run the appliance by turning the control knob to the
●
desired position. Adjust the speed according to mixed
components.
We recommend using the “PULSE” program,
or maximum speed.
Grinding of different products that are grouped
together without a thorough washing may
result in penetration of smell and taste of the
product previously ground.
Do not use the appliance with installed grinder
in continuous operation for more than 30
seconds. If within 30 seconds failed to complete
the process of grinding, turn off the appliance
and wait 5 minutes before restarting.
4
After the grinding set the control knob to
“0”
.
Always immediately after use wash the
container of grinder and grinder base with
a set of blades with hot water plus dishwashing
liquid. Wipe the grinder seal with a damp cloth.
After working with grinder
Turn the appliance off and remove the plug from the wall
●
outlet.
Remove the grinder, to his end hold the base for
●
accessories with one hand and use other hand to catch
the grinder. Turn the grinder counter-clockwise until it
reaches the end stop and take it off from the base for
accessories.
Turn the grinder upside down (the base to the top).
●
Turn the grinder base with a set of blades in a counter-
●
clockwise direction and remove the base with the set of
blades from the grinder’s cover.
Pour the ground contents into the dish.
●
Clean the grinder (see section
●
“Cleaning and
maintenance of appliance with installed mixing cup
(liquidizer) / grinder”
).
H
Cleaning and maintenance of appliance with
installed mixing cup (liquidizer) / grinder
Cleaning the appliance must be followed
immediately after use. This will prevent
leftovers build-up inside jug of the blender.
Pour about 450 ml of water into the jug and run the
●
appliance for about 10 seconds by turning and holding
the control knob to
“PULSE”
.
Then pour out the water from the jug, turn it upside down
●
and dry.
If necessary, wash the jug, the cover and cover cap,
●
a set of blades, grinder container and grinder base with
a set of blades with hot water plus dishwashing liquid.
Wipe the gasket seal of mixing cup and grinder seal with
●
a damp cloth.
Then rinse it in clean running water and dry.
●
If you left the jug for a long time without cleaning and the
●
pieces of mixed ingredients stuck to the inside of the jug,
use a nylon brush for cleaning.
We do not recommend putting the jug, the cover and
●
cover cap, the grinder, the set of blades, grinder container
and grinder base with a set of blades into a dishwasher.
Aggressive cleaning agents may adversely affect the
surface condition of the appliance.
Wipe the outside of the drive with a damp and soft cloth.
●
Do not put the drive unit into water or other
liquid.
To clean the drive unit do not use aggressive and abrasive
●
detergents such as emulsions, cleaning creams, pastes,
etc. They may remove the graphic symbols.
Do not clean the jug and grinder container with abrasive
●
sponges or rags.
Dry thoroughly all parts of the appliance.
●
FOOD PROCESSOR (BLENDER)
CHARACTERISTICS OF THE APPLIANCE
Blender is designed to perform operations to prepare meals.
Interchangeable equipment (a blade of food processor,
double-sided disc) allows for chopping, cutting, mixing dough
and chopping vegetables.
APPLICATION OF ACCESSORIES
Food processor blade
– is used for the processing of raw
or cooked meat. You can also use it to mix the dough (cake
batter).
Double-sided disc
A side applicable to making the slices - can be used to
–
cut into slices.
A side for making the chips - can be used for cutting /
–
grinding into chips.
Содержание JE1200-5
