Zelmer JE1200-5, Руководство пользователя

Страница: 97 / 106

101
JE1200-002_v03
The architecture of appliance
1
The control knob (PULSE, 0, Speed #1, Speed #2)
2
The feet
3
The drive
4
Wire connection
5
The driver (driving tool)
JUICE EXTRACTOR ELEMENTS
6
The container for leftovers
7
The spout
8
The bowl
9
Mounting brackets (clamps)
10
The strainer
11
The cover
12
The hopper
13
The pusher
14
The container of juice
15
The cover of the container with foam separator
16
The brush
THE BASE FOR ATTACHMENTS (ACCESSORIES)
17
The base for attachments (accessories)
GRINDER ELEMENTS
18
The grinder’s base with a set of blades
19
The gasket of grinder
20
The container of grinder
MIXING CUP ELEMENTS
21
The set of mixing cup blades
22
The gasket
23
The jug with level indicator
24
The cover of the jug
25
The overlay of the cover
BLENDER ELEMENTS
26
The gear (transmission)
27
The food processor container
28
The double-sided disc
29
The food processor blade
30
The cover of food processor
31
The pusher of food processor
A
JUICE EXTRACTOR
DESCRIPTION OF THE APPLIANCE
Your juice extractor is designed for fast fruit and vegetable
juice centrifuging with automatic separation of pulp.
Centrifugation speed was carefully selected to ensure
excellent quality juices. Small particles of fruit (or vegetable)
contained in the extracted juice are healthy, but may affect
the clarity of juice. This is an intended effect, as keeping
the highest nutrient, health and dietetic values of your
juices is more important than their clarity. The quantity of
juice obtained with 1kg of fruit or vegetables depends on
their freshness, cleanness of the filter and condition of the
shredding disc (e.g. for fresh carrots it is 50-60%). All parts
in contact with processed products are made of materials
suitable for contact with food.
Preparing for operation
DISASSEMBLING
Before first use, disassemble the appliance and
wash all parts in contact with processed fruit or
vegetables.
1
Press the locking clamps all the way down to release
the lid.
2 Remove the pusher and the lid.
3
Slide out the pulp container.
4 Remove the juice bowl with the strainer by turning the
bowl counter-clockwise so that the symbol on the bowl is
aligned with the symbol
on the motor unit. Remove the
juice bowl from the motor unit.
Wash all parts (except the motor unit) carefully in
warm water with some washing liquid. You can
also clean them in a dishwasher at max. 60°C
(except the juice bowl, strainer and motor unit).
Dry all parts thoroughly and replace once dry.
ASSEMBLING
1 Place the juice bowl on the motor unit, aligning the
symbol on the underside of the bowl with the symbol
on the motor unit.
2 Lock the juice bowl by turning it clockwise so that the
symbol on the motor unit is aligned with the symbol on
the underside of the bowl.
3 Mount the strainer on the skimmer so that the notch on
the skimmer is aligned with the groove in the strainer.
The strainer may be mounted in one position
only.
4
Slide the pulp container under the lid as follows: lean the
pulp container and place it under the insert of the bowl so
that the protrusion in the pulp container is placed inside the
groove in the bowl. Then slide it in towards the motor unit.
B
C