Zelmer CK1000, Руководство пользователя

Страница: 28 / 29

30
GW17-060_v01
Using your Hot Cup (Fig. B)
WARNING: Always position your Hot Cup in such a way
that the start button cannot be accidentally operated,
especially by children. As you use your Hot Cup,
a certain portion of the water boiled will be transferred
back to the water reservoir. This will mean reservoir
may become hot. Always use care when handling your
Hot Cup.
1
Press the lid release button.
2
Fill the water reservoir from your cold tap. The water
level should be between the MIN and MAX markings.
WARNING: Do not boil the water if it is below the
minimum level or beyond - the maximum level on the
indicator.
3
Closed the lid and press the stop button. This will make
sure that your hot cup will not immediately start a boil cycle
when you place it onto the power base.
4
Place the kettle on the power base.
5
Connect your Hot Cup to a mains supply socket.
6
Place a suitable cup or container with a tea bag, coffee,
sugar, etc. below the dispensing nozzle. Never operate your
hot cup without a cup or suitable container placed below
the dispensing nozzle. Adjust the volume selector control
to the required setting. The control adjusts the quantity of
boiling water dispensed by your hot cup. For smaller cups
like teacups, set control toward the MIN setting
(about
150 ml); for larger cups like coffee mugs, set the control
towards the MAX setting
(about 300 ml). If you are not
sure which setting to use, it is best to use a lower setting until
you gain experience using your Hot Cup or start with a large
mug.
7
Press the start button. The button will light up red and
your Hot Cup will start to boil.
8
The selected quantity of boiling water will be dispensed
into the cup and it will automatically Switch-Off. Your Hot
Cup is now ready to use again. You may need to wait a few
seconds for the Hot Cup to reset.
Stopping your Hot Cup
If you have started the boil procedure and then decide you
want to stop your Hot Cup for any reason, simply press the
stop button. You can also stop water that is being dispensed
by pressing the stop button. The boiled water will be safely
transferred back into the water reservoir.
Emptying yourHot Cup
1
After your Hot Cup has completely cooled down, unplug
it form the mains supply socket.
2
Press the lid release button.
3
Hold your Hot Cup over the sink and pour the water out.
4
Still holding your Hot Cup over the sink, turn it the right
way up and allow any water to drain out of the dispensing
nozzle. If no water drains out of the nozzle, it may be
because the stop button has been accidentally or intentionally
pressed. Press the start button to allow water to drain from
the nozzle.
Repeat steps 3 and 4 until all the water has been emptied
from your Hot Cup.
If your Hot Cup will not be used for an extended period (e.g.
if you are on holiday), we recommend that you irst empty
it. Before using your Hot Cup again, carry out several boil
cycles discarding the water each time.
Cleaning
Clean the exterior surface of your Hot Cup with a damp
cloth and then polish it with a soft, dry cloth.
Never immerse the base unit, power cord or plug in water
or any other liquid.
Always switch off and unplug your Hot Cup and allow it
to completely cool before cleaning.
Do not use harsh abrasives, chemicals or oven cleaners.
Descaling
To maintain it is performance, your Hot Cup will require
descaling once every three months or so. You may need to
descale your Hot Cup more frequently if you live in a hard
water area.
1
Fill your Hot Cup to the Max ill level and place an
empty cup on the drip tray. Select a suitable setting for the
dispensing control and press the start button .Wait for the
water to be dispensed into the cup.
2
Add a citric acid-based proprietary descaling product to
the hot water in the cup and stir.
3
Tip the contents of the cup into your Hot Cup and close
the lid.
4
Pace the empty cup on the drip tray and press the start
button.
5
Wait for the water to be dispensed into the cup.
6
Discard the water from the cup.
7
Repeat steps 4, 5 and 6 until the water level is at the
MIN mark. Open the lid and empty any remaining water into
the sink. Rinse your Hot Cup by illing it with clean water and
emptying it into the sink. Fill your Hot Cup with fresh water to
the MAX ill level and place an empty cup on the drip tray.
8
Press the start button and wait for the water to be
dispensed into the cup.
Discard the water in the cup.
Repeat steps 8 and 9 until the water level is at the MIN
mark. Open the lid and empty any remaining water into
the sink.