Zeiss Axioscope 7, Руководство по эксплуатации, Страница: 75 / 140

START-UP
Axioscope 5/7/Vario Mounting optional components ZEISS
03/2018 430035-7344-001 75
3.2.5 Changing the color splitter in the reflector module FL P&C
ATTENTION
Be extremely careful when installing the filters and the color splitter to avoid damaging and
soiling the optical components.
We recommend ordering completely equipped
reflector modules FL P&C, as changing the color
splitter is very challenging.
When changing the color filter, please proceed as
follows:
•
Remove the reflector module FL P&C from the
reflector turret (see also section
540H
3.1.6).
•
Loosen both slit screws (
541H
Fig. 3-43/ 1 ) with a
screwdriver.
•
Hold both parts of the reflector module (the
emission
part (
542H
Fig. 3-43/
2
) and the
excitation
part (
543H
Fig. 3-43/
3
) together, turn them against
the mounting position and put them down.
•
Now tilt the
excitation
part lying on top
(
544H
Fig. 3-44/
1
) upward and lift the
emission
part
(
545H
Fig. 3-44/ 4 ) from the holding fixtures
(
546H
Fig. 3-44/ 5b ).
•
Remove color splitter (
547H
Fig. 3-44/ 2 ) and spring
box (
548H
Fig. 3-44/ 3 ) from the bottom part of the
module.
•
Remove the old color splitter and carefully put
the new splitter with the reflective coating
facing upwards onto the spring box
(
549H
Fig. 3-44/ 3 ). Put both pieces together into the
bottom part of the module. Make sure that the
side latch of the spring box is in the appropriate
recess of the bottom part of the module.
Fig. 3-43 Opening the module
Fig. 3-44 Changing the color filter