Zeiss Axioscope 7 Скачать руководство пользователя страница 115

Страница: 115 / 140

OPERATION

Axioscope 5/7/Vario

Illumination and contrast methods in reflected light …

ZEISS

03/2018

430035-7344-001

115

4.3.2

Setting the reflected light darkfield

(1) Application

The reflected light darkfield method is applied when samples are examined which do not have areas with

different reflectivity (ideal brightfield samples), but which show scratches, cracks, pores (i.e., deflections)
on the plane surface. All such light-scattering details appear bright in the darkfield while the reflective

plane areas remain dark.

(2) Instrumentation

−

Axioscope with pre-installed LED 10 W illuminator or optionally used with the HAL 100 halogen

lamp mounted at the back of the upper part of the stand

−

Objectives: Epiplan-Neofluar, EC Epiplan-Neofluar, Epiplan with the additional label "HD"

−

Darkfield ACR P&C reflector module for reflected light in the reflector turret/slider

(3) Setting the reflected light darkfield

•

Adjust the microscope as described in section 4.3.1

for reflected light brightfield microscopy. The field

diaphragm image should lie just barely outside of the edge of the field of view to avoid reflections.

•

Swing the darkfield ACR P&C reflector module for reflected light on the reflector turret into the beam

path.

•

Remove the 6x20 mm compensator slider if mounted.

•

Swing in the objective position with the darkfield objective (HD) on the nosepiece.

•

If necessary, swivel in the darkfield reflector module on the reflector turret.

•

Open the aperture diaphragm fully and switch off or remove neutral filters if applicable.

•

Place the sample on the stage and adjust the focusing if necessary.

Содержание Axioscope 7













































































































































Результаты поиска

Содержание Axioscope 7

Отзывы:

Zeiss Axioscope 7, Руководство по эксплуатации, Страница: 115 / 140

Результаты поиска

Содержание Axioscope 7

Отзывы: