Zeiss Axioscope 7, Руководство по эксплуатации, Страница: 42 / 140

START-UP
ZEISS Mounting standard components Axioscope 5/7/Vario
42 430035-7344-001 03/2018
3 START-UP
The Axioscope microscopes can be installed, modified and started up by the customer himself.
On request, the ZEISS Service installs or modifies the microscope for an extra charge.
NOTE
Before installing and starting-up the microscope, read the Notes on instrument safety (see
section 1.1) carefully and thoroughly.
The assembly activities described on the following section are illustrated for the most part by way of
examples for one microscope stand type. However, they apply analogously to other microscope stand
models. Special features are described separately.
The same activities apply when assembling a microscope stand with an upper stand part and the stand
column Vario – special activities for the stand column Vario are described separately.
3.1 Mounting standard components
3.1.1 Unpacking and setting up
microscope stand
•
Remove all components from the packaging
and check that all components described on the
delivery note are present.
•
Set up the microscope stand (
286H
Fig. 3-1/ 1 ) on a
vibration-free, level, hard and non-combustible
surface.
•
Keep the original packaging for storage or for
returning the instrument to the manufacturer,
or dispose of it properly.
Fig. 3-1 Setting up the microscope