Zeiss Axioscope 7, Руководство по эксплуатации, Страница: 56 / 140

START-UP
ZEISS Mounting standard components Axioscope 5/7/Vario
56 430035-7344-001 03/2018
3.1.11 Mounting/removing the 80x60
motorized mechanical stage on the
Axioscope 7 motorized material
stand
The motorized stage can only be mounted
on/removed from the stand as an entire unit with
the stage carrier (see section 3.1.15 on page 59).
How to remove the stage
•
Unplug the power cable connector (Fig. 3-20/ 1 )
of the stage from the socket on the stand
(Fig. 3-20/
2 ).
•
Turn the stage (Fig. 3-19/ 1 ) and stage carrier
(
326H
Fig. 3-19/ 6 ) upside down and remove the four
mounting screws (Fig. 3-19/ 5 ) with the Allen
wrench (AF 3) (
327H
Fig. 3-19/ 4 ).
•
Carefully remove the stage from the carrier.
How to mount the stage
Fig. 3-20 Plugging in the power cable of the motorized mechanical stage
•
Turn stage (
329H
Fig. 3-19/ 1 ) and stage carrier (
330H
Fig. 3-19/ 6 ) upside down carefully and match the threaded
holes in the bottom of the stage (Fig. 3-19/ 2 ) to the corresponding holes in the carrier (
332H
Fig. 3-19/ 3 ).
•
Insert the four mounting screws (
333H
Fig. 3-19/ 5 ) into the holes.
•
Align the stage in XY-direction and tighten the screws with the Allen wrench (AF 3).
•
Plug the power cable connectors (
330H
Fig. 3-20/ 1 ) into the sockets on the stage (
330H
Fig. 3-20/ 3 ) and on the
stand (
330H
Fig. 3-20/
2
).
Fig. 3-19 Changing the motorized mechanical
stage