ZCS HYDxxxxES Series, Руководство пользователя

Страница: 34 / 45

34 / 45
Select “5. Over (V) Protection” and press “OK. Press “up” or “down” to change the 1
st
digit, press “ok” to confirm the
value and move to next digit. Input the value of Over (V) Protection per battery specification. Press “OK”.
6) *Max. Charge (V) (only for DEFAULT battery type)
Select “6. Max. Charge (V)” and press “OK”. Press “up” or “down” to change the 1st digit, press “ok” to confirm the
value and move to next digit. Input the value of Max. Charge (V) per battery specification. Press “OK”.
7) Max. Discharge (A)
Select “7. Max. Discharge (A)” and press “OK”. Press “up” or “down” to change the 1
st
digit, press “ok” to confirm the
value and move to next digit. Input the value of Max. Discharge (A) per battery specification. Press “OK”.
8) *Low (V) Protection (only for DEFAULT battery type)
Select “8. Low (V) Protection” and press “OK”. Press “up” or “down” to change the 1
st
digit, press “ok” to confirm the
value and move to next digit. Input the value of Low (V) Protection per battery specification. Press “OK”.
9) *Min. Discharge (V) (only for DEFAULT battery type)
Select “9. Min. Discharge (V)” and press “OK”. Press “up” or “down” to change the 1
st
digit, press “ok” to confirm the
value and move to next digit. Input the value of Min. Discharge (V) per battery specification. Press “OK”.
10) * Empty Discharged (V) (only for DEFAULT battery type)
Select “10. Empty Discharged (V)” and press “OK”. Press “up” or “down” to change the 1
st
digit, press “ok to confirm
the value and move to next digit. Input the value of Empty Discharged Voltage per battery specification. Press “OK”.
11) * Full Charged (V) (only for DEFAULT battery type)
Select “11. Full Charged (V)” and press “OK”. Press “up” or “down” to change the 1
st
digit, press “ok” to confirm the
value and move to next digit. Input the value of Full Charged Voltage per battery specification. Press “OK”.
12) Save
Select “12. Save” and press “OK” to complete setting battery parameters.
2. Clear Energy Data
Select “2. Clear Energy” and press “OK”, “input password” is shown. Input the password “0001”, press “Up” or
“Down” to change the 1
st
digit, press “OK” to confirm the value and move to next digit, when “0001” is shown on
the screen, press “OK”. If “Incorrect, Try Again!” is shown on the screen, press “Back” and input the password again.
3. Clear Events
Select “3. Clear Events”, press “OK” button twice to clear all the events.
4. Country (refer to Set country )
Select “4. Country”, press “OK”, current country setting is shown, input new country code & press “OK”
5. Anti Reflux
5.Anti Reflux Control
1.Anti Reflux Control
Enable
Disable
2.Reflux Power
***KW
“Up”
↑
“Down”
↓