32 / 45
3)
PF Time Setting
Select “3. PF Time Setting”, then press “OK”. The following will be shown on the display:
Set: *. *** s
Press “Up” or “Down” to change the 1
st
digit, press “OK” to switch to next digit. After changing all digits, press “OK”.
4)
QV Time Setting
Select “4. QV Time Setting”, then press “OK”. The following will be shown on the display:
Set
：
** s
Press “Up” or “Down” to change the 1
st
digit, press “OK” to switch to next digit. After changing all digits, press “OK”.
5)
Control 81.S1
Select “5. Control 81.S1”, press “OK”. Press “up” or “down” to select “Enable 81.S1” or “Disable 81.S1”, press “OK”.
6.4.2.
Advanced setting:
2.Advanced Setting
Input Password 0001
Up”
↑
“Down”
↓
1.Battery Parameter
2.Clear Energy Data
3.Clear Events
4.Country
5.Anti Reflux
6.IV Curve Scan
7.Battery Active
8.DRMS Control
9.Safety Param.
Select “2. Advanced Setting” and press “OK”, “input password” is shown. Input the password ”0001”, press “Up” or
“Down” to change the 1
st
digit, press “OK” to switch to next digit, when “0001” is shown on the screen, press “OK”
to enter “2. Advanced Setting” interface.
If “Incorrect, Try Again!” is shown on the screen, press “Back” and input the password again.
