DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
60
9.3
The Status Tab
Note: May take a few seconds to load after being clicked
Output Value
Explanation
Video Status
CH
The channel number (1 or 2)
Bitrate (Kbps)
Current target bitrate of encoder in Kbps
Actual Bitrate
Actual bitrate being output by encoder in Kbps
FPS
Current target frames per second of encoder
Actual FPS
Actual frames per second being encoded
Key-frame FPS
Number of key-frames per second (for example, a value of 0.5 means a key frame
is inserted every two seconds)
Width
Width of encoded picture
Height
Height of encoded picture. A small “i” will appear if interlaced is being encoded.
Audio Status
Channel
The channel number (1 or 2)
Subchannel
Always 1 in this release
Codec
The codec being used to encode audio for that channel
Stream Status
Channel
The channel number (1 or 2)
URL
URL the channel is being streamed to
frames
Number of frames sent from encoder to channel since the beginning of encoding.
This can serve as a quick sanity check (for example, you can click “Refresh”,
count to 10, click “Refresh” again, and you should see an increase of around 600
for 60 frames per second content).
Input Status
Input
Input type
Resolution
Capture resolution for that input
FPS
Capture frames per second for that input
Parameter
Options (default in bold)
Description
Refresh Button
Click button to manually refresh information.
Auto Refresh
Checked
Unchecked
Sets whether the status tab will automatically
refresh information once every ten seconds.