DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
15
(7)
If the encoder hasn’t already autostarted, click on “start” in the “Channel Controls” section near the
bottom of the screen. If the encoder is already running, click on “stop” and then “start” to confirm
the specified values are in effect.
*Note:
By default a limited selection of video encoding settings are available in the user interface. See Section
8.3, “Advanced Settings Mode”, for more information on accessing additional settings.
Figure 6 Channel 1 Tab – UDP
(4) Change to “UDP”
(5) Change to PC IP
Address or
Multicast Address
(6) Note Value
(1) If necessary, click “Stop”
(7) Click “Start”
(2) Verify
Is “HD-SDI”
(3) Change to
“1920x1080” or
“Follow input”
