DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
49
(6)
Now that DHCP is no longer set in your configuration (“z3_config1” is pictured) and your network
settings have been entered, click on the “Save” button.
(7)
When you do this, a pop-up window appears reminding the user that, for changes to IP Address /
Local Netmask / Default Gateway to take effect, a reboot is required, and asking if a reboot is
desired. Click “OK” (and then “OK” in the “Are you sure?” window after that) to start rebooting.
*Note:
The very first time settings are saved may take up to 30 seconds. This is due to some flash initialization
which occurs on the very first configuration save.
Figure 55 Reboot Reminder for Changing IP Settings
Figure 54 Setting DHCP within z3_config1
Un-check “Use DHCP”
again
Click “Save”
