DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
67
(UDP, TSFILE, MPTS
*
& ASI Only)
PCR Interval
*
(UDP, TSFILE, MPTS
*
& ASI Only)
0 – 999 (
50
)
PID assigned to PCR in the TS stream.
PMT PID
*
(UDP, TSFILE, MPTS
*
& ASI Only)
0 – 999 (
31
)
PID assigned to PMT in the TS stream.
TS Rate
(UDP, TSRTP, TSFILE,
MPTS
*
& ASI Only)
125K – 20000K (
10000K
)
The rate of the transport stream. Normally,
this value should be set to 1.25 * (video
b audio bitrate). This can be set to
higher values to allow leeway for times
when many bits are needed to encode. This
can be especially useful for ensuring smooth
playback at lower bitrates (see Section 6.12,
“Adjusting the UDP TS Rate”).
TS Lowlat Mode
(UDP & TSRTP Only)
True
False
Selecting “True” causes the TS muxer to
instead send packets out as soon as it
receives them rather than buffering them.
This results in lower latency at the expense
of decreased network efficiency and a less
smooth bitstream. There is a limit of 5Mbps
for TS Lowlat Mode.
Cannot be used with Auxiliary TS File.
Must be set to “False” for stream to be
compliant with ISO 13818-1 systems
specification for transport stream timing.
FEC Enable
(TSRTP Only)
True
False
Selects whether Pro-MPEG Forward Error
Correction (FEC) is enabled.
FEC Columns (L)
(TSRTP Only)
5
Allows for setting the number of FEC
columns. The number of columns multiplied
by the number of rows must be less than or
equal to 100.
FEC Rows (D)
5
Allows for setting the number of FEC rows.
