DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
56
9.0
SUMMARY OF OPTIONS
This section lists the different options that are available in the various menus.
9.1
The System Setup Tab
Parameter
Options (default in bold)
Notes
Local IP Setup
Local IP Address
192.168.x.y
(192.168.81.68)
Sets the IP address of the DME-05. Note that a
“save” of these settings and a reboot is needed
for changes to this value to take effect.
When in DHCP mode, this field is not applicable.
Local Netmask
255.255.z.w (
255.255.0.0
)
Sets the netmask of the DME-05. Note that a
“save” of these settings and a reboot is needed
for changes to this value to take effect.
When in DHCP mode, this field is not applicable.
Default Gateway
192.168.a.b (
192.168.0.1
)
Sets the network gateway to use for the DME-05.
Note that a “save” of these settings and reboot
is needed for changes to take effect.
When in DHCP mode, this field is not applicable.
DNS Server IP 1
a.b.c.d (8.8.8.8)
Specifies the primary DNS server to be used for
hostname lookup when in static IP mode. When
in DHCP mode, DNS information is acquired from
the DHCP server and this field is not applicable.
DNS Server IP 2
e.f.g.h (8.8.4.4)
Specifies the secondary DNS server to be used
for hostname lookup when in static IP mode.
When in DHCP mode, DNS information is
acquired from the DHCP server and this field is
not applicable.
Device Setup
Use DHCP
Checked
Unchecked
Sets whether DHCP is used to dynamically obtain
an IP address at start up.
Auto Start
Checked
Unchecked
Check this box to set the system to
automatically start encoding upon powering on.
