DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
26
6.10
Encoding an HDMI Video Source
The Z3-DME-10 also supports encoding non-HDCP HDMI video.
Connect an HDMI source to “HDMI In” on the rear panel of the encoder.
Return to the user interface and click the “stop” button to stop any current encoding.
At the CH1 tab, change the “Video Source” to “HDMI1” using the dropdown menu.
Verify your remaining settings are as desired. See Section 9.0 for a detailed list of all options.
*Note:
By default a limited selection of video encoding settings are available in the user interface. See Section
8.3, “Advanced Settings Mode”, for more information on accessing additional settings.
Click the “start” button.
Figure 20 Channel 1 Tab - HDMI
Figure 19 DME-05 Rear Panel HDMI Encode Connections
(3) Change to
“HDMI1”
(5) Click “Start”
(1) Connect to
HDMI Source
Connect to
Ethernet
Connect to
AC Power
