DOC-USR-0151-01
___________________________________________________________________________________________
Z3 Technology, LLC
♦
100 N 8
th
ST, STE 250
♦
Lincoln, NE 68508-1369 USA
♦
+1.402.323.0702
8
2.0
QUICK START GUIDE
2.1
If You Have Received a System from Z3 with the Software Preloaded
To start working with the encoder, you can go straight to Section 6.0, “GETTING STARTED WITH THE DME-
05,” on page 12. This section describes how to quickly generate a UDP, RTP, RTSP or RTMP stream over IP
as well as how to generate an ASI stream. Information is also provided on how to change bitrate
dynamically, how to adjust the UDP TS rate, tuning for latency, streaming in multiple resolutions,
recording to USB and utilizing various features including MPTS, closed captioning and forward error
correction.
Details on configuring and running the DME-05 as a decoder can be found in Section 7.0, “RUNNING THE
DECODER”, on page 39.
2.2
If You Already have a System from Z3 and Need to Update the Firmware
You can update the firmware via the HTTP-based user interface by following the instructions in Section
8.4: “Making a Firmware Update”, on page 53.
*Note:
Actual version numbers for your Z3 product may differ from those pictured in this document.
