YSI MultiLab 4010-1W, Руководство по эксплуатации

Страница: 85 / 114

MultiLab 4010-1W Transmitting data
ba76141e07 08/2018
85
Starting the program
for the data
reception
Transmitting data
(options)
11.2 MultiLab Importer
With the aid of the MultiLab Importer software, you can record and evaluate
measurement data with a PC.
3. On the PC, start the program for the data reception, e.g.:

MultiLab Importer (see section 11.2 M
ULTI
L
AB
I
MPORTER
, page 85)

Terminal program
Data Control Operation / description
Current
measured
values of all
connected
sensors Manual

With
<F2>
/ [USB output] .

Simultaneously with every manual
data storage process (see section 10.1
M
ANUAL DATA STORAGE
, page 78).
automatic, at
intervals

With
<F2__>
[USB output] .
Then you can set the transmission
interval.

Simultaneously with every automatic
data storing process (see section 10.2
A
UTOMATIC DATA STORAGE AT INTER
-
VALS
, page 79).
Stored mea-
sured values Manual

Displayed dataset with
<F2>
[USB out-
put] after calling up from the data stor-
age.

All datasets with the Output to RS232/
USB function.
(see section 10.3.1 M
ANAGING THE
MEASUREMENT DATA STORAGE
, page
81).
calibration
records Manual

Calibration record with
<F2>
/ [USB
output] (see section 5.2.7 C
ALIBRATION
DATA
, page 34; section 7.3.7 C
ALIBRA
-
TION DATA
, page 53; section 8.3.6 C
AL
-
IBRATION DATA
, page 61).
automatic

At the end of a calibration procedure.
The following rule applies: With the exception of the menus, shortly
pressing the
<F2>
/ [USB output] key generally outputs the display
contents to the interface (displayed measured values, measuring
datasets, calibration records).
More detailed information can be found in the MultiLab Importer
operating manual.