YSI MultiLab 4010-1W, Руководство по эксплуатации

Страница: 74 / 114

Settings MultiLab 4010-1W
74
ba76141e07 08/2018
9.5.2 Data storage
This menu contains all functions to display, edit and erase stored measured
values.
9.5.3 Automatic Stability control
The automatic Stability control function continuously checks the stability of the
measurement signal. The stability has a considerable impact on the reproduc-
ibility of measured values.
You can activate or switch off the automatic Stability control function (see
section 9.5 S
ENSOR
-
INDEPENDENT SETTINGS
, page 73).
The measured parameter flashes on the display

as soon as the measured value is outside the stability range

when the automatic Stability control is switched off.
9.5.4 Automatic switch-off function
The instrument has an automatic switch-off function in order to save the
batteries (see section 9.5.1 S
YSTEM
, page 73). The automatic switchoff function
switches off the meter if no key is pressed for an adjustable period.
The automatic switchoff function is not active

if the power pack is connected

if a USB-B cable is connected

if the Automatic data storage function is active, or with automatic data trans-
mission
System / Clock function Date format
Datum
Time Settings of time and date.
For details, see section 4.4.5 E
XAMPLE
2
ON NAVIGA
-
TION
: S
ETTING THE DATE AND TIME
, page 24
System / Service informa-
tion
Hardware version and software version of the meter
are displayed.
System / Reset - Resets the system settings to the default values.
For details, see section 9.6.2 R
ESETTING THE SYS
-
TEM SETTINGS
, page 77
Menu item Possible setting Explanation
Detailed information on the memory functions of the
MultiLab 4010-1W are given in section 10 D
ATA STORAGE
, page 78.