YSI 600DW-B, Руководство пользователя

Страница: 210 / 298

EcoWatch for Windows Section 4
YSI Incorporated Drinking Water Monitoring Systems Operation Manual 4-39
Note that there are two color buttons, one for the trace color and the other for the
background color. Clicking on either of these buttons will take you to the
Color dialog
box where you can change the color.
Use the
Set All buttons to quickly set all traces or backgrounds to the same color.
Page Title
This is where you can enter a title for the graph. The title may have one or two lines.
1 Trace per Graph
Choose this to have just one parameter on each graph.
2 Traces per Graph
Choose this to have two parameters on each graph.
TABLE
TABLE TABLE
TABLE
If there is no table, then the commands on this submenu will be unavailable. The Table submenu offers the
following commands:
Font/Color
Goes to the Font Dialog Box where you can change the font and color of text that appears
in the table.
Page Color
Goes to the Color Dialog Box where you can change the color of the table background
color. That is the part of the table where the readings appear.
Highlight Color
Goes to the Color Dialog Box where you can change the color of the table highlight
color. That is the part of the table where the reading units appear.
SET DEFAULT TEMPLATE SET DEFAULT TEMPLATE SET DEFAULT TEMPLATE SET DEFAULT TEMPLATE
This option allows you to select display parameters for your data when you initially open a file in
EcoWatch. Display parameters include background and trace colors on your graph, which
parameters are displayed, parameter ordering, parameter units, and scaling of those parameters
(either manual or automatic). The first time you use EcoWatch with a data file, graphing will
proceed according to the default settings present in EcoWatch. For example, graph backgrounds
will all be black, traces will be plotted each with a different color, all parameters will be auto-
scaled, and if your sonde measures conductivity and dissolved oxygen, EcoWatch will display
specific conductance in mS/cm and dissolved oxygen in mg/L. You can change the default
settings by using
Set Default Template.