YSI 600DW-B, Руководство пользователя

Страница: 130 / 298

650 MDS Section 3
YSI, Incorporated Drinking Water Monitoring Systems Operations Manual 3-21
3.4 SONDE MENU INT 3.4 SONDE MENU INT 3.4 SONDE MENU INT 3.4 SONDE MENU INTERFACE ERFACE ERFACE ERFACE
3.4.1 INTRODUCTION
3.4.1 INTRODUCTION 3.4.1 INTRODUCTION
3.4.1 INTRODUCTION
The Sonde menu selection in the 650 Main menu provides a terminal-like interface simulating the
connection of the sonde to a PC as described in detail in Section 2 of the 6-series manual. Thus, this item
provides access to the entire menu structure of your 6-series sonde software so that you can perform custom
setup in the same way that would be possible if the sonde were attached to a PC.
From the
650 Main Menu , select Sonde menu and press Enter . A display similar (depending on sonde
type and sonde software version) to that shown below will appear:
Note that the icon in the lower right of the screen has changed from “meter” to “sonde” indicating that the
menu shown originates in the 6-series sonde. Note also that the 650 display has been designed to be very
similar to that presented on a monitor when a 6-series sonde is attached to a PC as shown below.
------------------Main-------------
----
1-Run 5-System
2-Calibrate 6-Report
3-File 7-Sensor
4-Status 8-Advanced
S l
t ti (0 f i
Sonde Icon