YOKOGAWA WT210 Скачать руководство пользователя страница 42

Страница: 42 / 316

1-5

IM 760401-01E

Functional Overview and Digital Display

Comparator Function (Option)

This function compares a preset limit and the measured, computed, or integrated value,

and outputs the determination result using relay contacts.

Remote Control Function (Option)

On models with the /DA4, /DA12, or /CMP option, the TTL logic signal (negative pulse)

can be used to control the WT210/WT230 or output externally.

External Input

The following five types of control signals are available.

EXT HOLD

Holds updating of the displayed values or releases the hold status.

EXT TRIG

Updates the displayed values in hold mode.

EXT START

Starts integration.

EXT STOP

Stops integration.

EXT RESET

Resets the integration result.

External Output

The following signal is output during integration.

INTEG BUSY

Outputs continuously from integration start through integration stop.

Communication Functions (Option on the WT210, Standard on the WT230)

You can select GP-IB interface or serial (RS-232-C) interface. Measured/computed data

of up to 14 channels can be output to your PC via the communication interface. You can

also set various functions of the WT210/WT230 from your PC.

Output Function to an External Plotter and Printer

Measured/computed data can be printed on an external plotter or printer via the GP-IB or

serial (RS-232-C) interface.

Other Functions

Backup Function of Setup Parameters

This function backs up setup parameters (including computed values) if the power is

cut off such as a result of a power failure.

Initialization of Setup Parameters

This function initializes the setup parameters to factory default.

Zero Level Compensation

Zero level compensation refers to creating a zero input condition inside the WT210/

WT230 and setting the level at that point as the zero level. Zero level compensation

must be performed in order to satisfy the specifications of this instrument. When the

measurement range is changed, zero level compensation is performed automatically.

However, if the measurement range is not changed for a long time, the zero level may

shift due to environmental changes around the instrument. In such case, you can

manually perform zero level compensation.

Key Lock

Setup operations using front panel keys can be disabled except for the power switch

and KEY LOCK switch.

1.2 Functions

Содержание WT210





























































































































































































































































































































Результаты поиска

Содержание WT210

Отзывы:

YOKOGAWA WT210, Руководство пользователя, Страница: 42 / 316

Результаты поиска

Содержание WT210

Отзывы: