YOKOGAWA WT210 Скачать руководство пользователя страница 136

Страница: 136 / 316

8-6

IM 760401-01E

Explanation

Storing Setup Parameters

• Stores the current setup parameters which consist of the following. Four

destinations (FiLE1/FilE2/FiLE3/FiLE4) are available.

Measurement range, measurement mode, measurement synchronization source,

scaling settings, averaging settings, input filter settings, MAX hold ON/OFF setting,

computation settings, number of displayed digits, display update rate setting, crest

factor, integration settings, harmonic settings, plotter output settings, store/recall

settings, and communication settings.

• When data are saved in a file and you want to save data in the same file, display C

will show “SAVEd.” Pressing the ENTER key will result in overwriting the

previously saved data.

• Setup parameters are saved in another internal memory than measured data.

• Saved setup parameters are backed up by the lithium battery in the same way as

measured data. For a description of the lithium battery life, see section 15.6.

Recalling Setup Parameters

When setup parameters are being retrieved, all setup parameters are being set

accordingly. After that, measurements can be carried out.

8.2 Storing/Recalling Setup Parameters

Содержание WT210





























































































































































































































































































































Результаты поиска

Содержание WT210

Отзывы:

YOKOGAWA WT210, Руководство пользователя, Страница: 136 / 316

Результаты поиска

Содержание WT210

Отзывы: