YOKOGAWA WT210 Скачать руководство пользователя страница 134

Страница: 134 / 316

8-4

IM 760401-01E

Recalling Measured/Computed Data (Retrieving Data from the Internal Memory)

After displaying data stored in the internal memory, you can use all display functions

and carry out integration and display these data. Furthermore, by using the

communication function, data can be output.

• Items which can be recalled

all data which can be stored.

• Aborting Recalling

The recall operation stops in the following conditions.

• when all stored data are retrieved;

• when during the recall process “oFF” is selected at the store ON/OFF setting.

Setting the Recalling Interval

Sets the time interval for repeating the recall operation.

• Setting range: 00.00.00 (0 hrs, 00 min, 00 sec) to 99.59.59 (99 hrs, 59 min, 59 sec)

• Initial value: 00.00.00

When set to 00.00.00, the recalling interval is set to the display update rate as when

the data was stored.

Recalling ON/OFF

After having set the recalling interval, select the recall menu once again. The initial

value is oFF.

• on: Recalling will start by pressing the ENTER key after selecting “on”; the

RECALL indicator will light while recalling is in progress.

• oFF: Recalling will stop by pressing the ENTER key after selecting “oFF”; the

RECALL indicator will extinguish

Note

•

During recalling, the measurement conditions/range

will become as those of the data being

recalled. After recalling finishes, the original measurement conditions will return.

Measurement range, measurement mode, measurement synchronization source, input

filter ON/OFF, scaling ON/OFF, scaling constants, averaging ON/OFF, averaging mode,

averaging coefficients, MAX hold ON/OFF, display update rate, crest factor, integration

mode, integration time, harmonic measurement function ON/OFF, PLL source, target

element, computation method of harmonic distortion factor

•

When recalling data to a personal computer by communication interface, data might be cut

due to the data length or used personal computer. In such a case, increase the recalling

interval.

8.1 Storing/Recalling Measured/Computed Data

Содержание WT210





























































































































































































































































































































Результаты поиска

Содержание WT210

Отзывы:

YOKOGAWA WT210, Руководство пользователя, Страница: 134 / 316

Результаты поиска

Содержание WT210

Отзывы: