YOKOGAWA WT210 Скачать руководство пользователя страница 118

Страница: 118 / 316

6-8

IM 760401-01E

Stopping Integration

If you stop integration, the integration process stops at the integrated value and

elapsed integration time of the previous display update. The measured values

between the previous display update and the execution of the integration stop are not

integrated.

Integration Reset

• Resetting will result in returning the integration results to the status before

integration started.

• Pressing the RESET key is useful after integration has been stopped.

• For details regarding the relation with the START/STOP key, refer to the following

section.

Display in case of Integration Over

• When the maximum integration value has been reached (999999 MWh/MAh or

–99999 MWh/MAh), integration will stop and that result will be held on the display.

• When the maximum integration time has been reached (up to 10000 hrs),

integration will stop and that result will be held on the display.

Note

•

The maximum number of digits used to display the elapsed time of integration is nine

(when the hour, minute, and second digits are added together). The WT210/WT230

displays the elapsed time of integration on display A. However, because the maximum

number of digits that can be displayed on display A is five, all the digits of the elapsed time

of integration may not be displayed in certain cases. Therefore, the number of digits that

are displayed varies depending on the elapsed time of integration as follows:

Elapsed Time of Integration

Display on Display A

Display Resolution

0 to 9 hr 59 min 59 s

0.00.00 to 9.59.59

1 s

10 hr to 99 hr 59 min 59 s

10.00.0 to 99.59.5

10 s

100 hr to 999 hr 59 min 59 s

100.00 to 999.59

1 min

1000 hr to 9999 hr 59 min 59 s

1000.0 to 9999.5

10 min

10000 hr

10000

1 hr

•

For details on Wh, Wh

, Ah, Ah

, see page 6-3. For details related to the average active

power during integration, see section 4.12.

•

The integrated value is determined and displayed by summing the value that is measured

at every display update rate, irrespective of the MAX hold function.

6.3 Displaying Integrated Values

Содержание WT210





























































































































































































































































































































Результаты поиска

Содержание WT210

Отзывы:

YOKOGAWA WT210, Руководство пользователя, Страница: 118 / 316

Результаты поиска

Содержание WT210

Отзывы: