YOKOGAWA WE430 Скачать руководство пользователя страница 13

Страница: 13 / 73

<1. General Information>

1-6

IM 12Y18A03-01EN

1st Edition : Oct. 04, 2019-00

Pressure Regulator

Adjusts flow of the incoming sample stream.

Flow Valve

Used to turn off flow to the flow cell.

Flow Meter

Measures the sample flow rate.

Restrictor Tube Assembly

Used in conjunction with the pressure regulator to maintain a steady sample flow rate.

Fluid Connector Block

Connects the reagent bottle to the sample stream and flow cell assembly.

Diffusion Tubing Assembly

Semi-permeable tubing through which the reagent and iodine diffuse into the sample.

Reagent Bottle

Contains the iodine solution and acid reagent that adjusts the sample pH.

Thumbscrew

Supports the reagent bottle.

Reagent Bottle Clamp

Holds the reagent bottle securely in place.

Reagent Mixing Loop

Mixes the iodine reagent with the oxygen scavenger in the sample to form iodide, which is

measured by the iodide sensing electrode.

Flow Cell

Contains the iodide sensing electrode, reference electrode and ATC probe.

Iodide Electrode

Senses iodide ions in the sample stream and produces an electrical potential dependent on

the oxygen scavenger concentration.

Reference Electrode

Provides a constant reference potential and completes the measurement circuit.

Pressurized Reference Electrode Filling Solution Bottle

Provides a constant flow of electrolyte solution through the reference electrode for

maximum stability.

Check Valve

Prevents the backflow of electrolyte from the pressurized reservoir.

ATC Probe

Measures the sample temperature and inputs the data to the microprocessor for automatic

temperature compensation (ATC).

Standard Injection Port

Allows the connection of the dynamic calibrator tubing to the fluid connector block during a

dynamic two point calibration.

Air Pump

Provides air to pressurize the filling solution bottle.

LCD Display

Provides digital readouts of concentration, temperature, millivolts and error codes.

Keypad

Consists of five mode keys, four prompt indicator lights, two scroll keys and one key for

entering data. Mode and error indicators are also incorporated on keypad.

Status Indicator

Two LED lights that illuminate according to current status of the analyzer.

Green Light: Indicates that system is in correct working condition.

Yellow Light: Indicates a warning, system in hold or that maintenance is required.

Red Light:

Indicates that something is seriously wrong.

NOTE

When either the yellow or red LED is lit, there may be an entry in the diagnostics mode that

indicates the error. The logging feature must be initiated in the setup mode. Refer to Section 3.1,

Use of the Setup Mode for instructions.

Содержание WE430










































































Результаты поиска

Содержание WE430

Отзывы:

YOKOGAWA WE430, Руководство пользователя, Страница: 13 / 73

Результаты поиска

Содержание WE430

Отзывы: