manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL950 Скачать руководство пользователя страница 249

19-3

IM DL950-02EN

Inserting an SD Memory Card

Insert the SD memory card into the slot with the front of the card facing the front panel.
The SD memory card slot is on the left side panel of the instrument.
If you are using an SD memory card that has a write-protection feature and you want to save data 
to or format the card, disable the write-protection feature before you insert the SD memory card into 
the instrument.

SD memory card

Removing the SD Memory Card

Press the edge of the SD memory card with your finger. Release the SD memory card to eject.
Remove the SD memory card.

  

Push the card in.

Release the SD memory card to eject.

General SD Memory Card Handling Precautions

Follow the general handling precautions that are provided with your SD memory card.

19.1  Connecting a Storage Device

Содержание ScopeCorder DL950





























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды