manualshive.com logo in svg

YOKOGAWA ScopeCorder DL950, Руководство пользователя

Поделиться
Скачать
YOKOGAWA ScopeCorder DL950 Скачать руководство пользователя страница 125

5-7

IM DL950-02EN

Detail Setup (Detail Setup)

2.

 Tap 

Detail Setup

, or press the soft key. The following screen appears.

 

Set the horizontal axis display mode.

Set the scale value’s display item.

Set the number of displayed digits for 

analysis results (1 to 20)

Set the screen background color.

Set the channel information.

Turns trace labels on or off

Turns the manual event display on or off

Set the scale font size.

Turns the extra window on or off

Set the font size for displaying analysis results.

Turns the level indicator on or off

Set the channel information display range.

Scale Value’s Display Item

Select from the following items:
OFF:        Scale values are not displayed.
All :         All scale values are displayed.
Time Scale :  Only time scale values are displayed.

Horizontal Axis Display Mode

Select from the following items:
Relative time:  Relative time from the start of measurement
Absolute time:  Absolute time of measurement (not selectable when the measurement time is 1 

second or less)

Auto:         Automatically set according to the horizontal scale (TIME DIV) at the time of 

measurement

Channel Information

Set the contents to display as channel information.
OFF:    Not displayed
Setting:  Setup parameters
Monitor:  Measured values

Channel Information Display Range

Set the channel information display range.
Full:     Channel information is displayed in full screen.
Narrow:  Channel information is displayed with the same width as the setup menu.
Wide:     Channel information is displayed with the same width as the setup menu in two 

columns.

5.4  Configuring the Detailed Display Settings

Содержание ScopeCorder DL950





























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды