16-12
IM AQ1200-01EN
Averaged Measurement
5.
Press
AVE
. Averaged measurement begins.
The screen shows the measured waveform, and the Confirm Trace menu appears.
During measurement, a mark appears at the top of the display to indicate that the laser light is on.
Cannot be selected during
measurement.
Set markers
(see section 6.1)
.
Note
In the measurement conditions, if you set “Wavelength 2” and “Wavelength 3” in addition to “Wavelength
1,” you can perform multi wavelength measurement. If Wavelength on the main view screen is set to “All,”
measurement is executed using multiple wavelengths for each core.
When Auto Save is Set to On in the Project Measurement Conditions
When measurement is complete, the measured results are automatically saved. The main view
screen appears, and check marks or pass/fail judgment indications appear in the core number cells
whose measurement results have been saved.
When Auto Save is Set to Off in the Project Measurement Conditions
6.
When measurement is complete, the measured results are not automatically saved.
All the items on the Confirm Trace menu become available.
Returns to the list
• When measured results have been saved
The main view screen returns.
• When measured results have not been saved
The following screen appears.
If necessary, save the measured results.
Set the wavelength.
You can select one of the wavelengths that
have been set in the measurement conditions.
You can continue with the analysis. Save the measured results after analysis is complete.
16.3 Measuring Multi-Core Fibers
