Yetter GERMINATE UNIFORMITY 2940, Руководство оператора

Страница: 13 / 82

13
2940 Air Adjust System Information
Air Compressor Assembly
2940 Air Adjust requires a stable air supply source that can provide a
minimum of 75psi of clean, dry
air. The ‘clean, dry air’ is a key
component of the air supply, moisture within the air supply can
shorten the life cycle of the system. Yetter compressors should build
to 145psi on the tank gauge before shutting off. When pressure in
the tank drops below 120psi, the compressor will engage to build
back up to 145psi. Other pneumatic systems, for example pneumatic
down force or air clutches, can be plumbed using the Yetter
compressor as its air source. Be sure to regulate the air entering any
other systems to OEM specifications.
Electric Compresso External Diagram
A
– 2940-416 175psi Safety Relief Valve
G
– 2940-390 Electric Air Compressor
B
– 2940-439 0 – 160psi Compressor Gauge
H
– 2940-395 Replacement Filter Element
C - 2940-377 Pressure Switch 125psi
– 145psi
I
– 2940-391 100 Amp Compressor Relay
D
– 2940-635 3/8”PTC X 3/8NPT 90° Fitting
J
– 2940-440 12G Tank Assembly
E
– No Part # Main Power Connector
K
– No Part # Tank Drain Valve
F
– 2940-336 Head Pressure Relief Valve
Not shown
–
No part # Enclosure Cage