Yealink W80, Руководство администратора

Страница: 144 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System
141
Description It configures the volume of the DTMF tone (in dB).
Permitted
Values
Integer from -33 to 0
Default -10
[1]
X is the account ID. X=1-100.
[2]
If you change this parameter, the phone will reboot to make the change take effect.
Suppress DTMF Display
Suppress DTMF display allows the phones to suppress the display of DTMF digits during an active call. DTMF digits
are displayed as “*” on the phone screen. Suppress DTMF display delay defines whether to display the DTMF digits
for a short period of time before displaying as “*”.
Topic
Suppress DTMF Display Configuration
Suppress DTMF Display Configuration
The following table lists the parameters you can use to configure the suppress DTMF display.
Parameter features.dtmf.hide <y0000000000xx>.cfg
Description It enables or disables the phone to suppress the display of DTMF digits during an active call.
Permitted
Values
0 -Disabled
1 -Enabled, the DTMF digits are displayed as asterisks.
Default 0
Web UI Features > General Information > Suppress DTMF Display
Parameter features.dtmf.hide_delay <y0000000000xx>.cfg
Description
It enables or disables the phone to display the DTMF digits for a short period before displaying aster-
isks during an active call.
Note : It works only if “features.dtmf.hide” is set to 1 (Enabled).
Permitted
Values
0 -Disabled
1 -Enabled
Default
0
Web UI Features > General Information > Suppress DTMF Display Delay