Yealink W80, Руководство администратора

Страница: 132 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System
129
Ringer Device Configuration
Ringer Device Configuration
The following table lists the parameters you can use to configure the ringer device.
Parameter features.ringer_device.is_use_headset <y0000000000xx>.cfg
Description It configures the ringer device for the phone.
Permitted
Values
0 -Use Speaker
1 -Use Headset
2 -Use Headset & Speaker
Default 0
Web UI
Features > Audio > Ringer Device for Headset
Hearing Aid Compatibility (HAC) Volume Control Configuration
The following table lists the parameters you can use to configure the HAC feature.
Parameter voice.handset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the handset's volume level to be reset to level 3 after the call if the volume level
for the current call exceeds the standards TIA4965.
Permitted
Values
0 -Disabled
1 -Enabled, if the handset's volume level for the current call is adjusted to level 4 or 5, the volume level
automatically resets to 3 after the call. That is, the initial volume level is 3 for the next call.
Default 1
Parameter voice.headset.tia4965.enable <y0000000000xx>.cfg
Description
It enables or disables the headset's volume level to be reset to level 3 after the call if the volume level
for the current call exceeds the standards TIA4965.
Permitted
Values
0 -Disabled
1 -Enabled, if the headset's volume level for the current call is adjusted to level 4 or 5, the volume level
automatically resets to 3 after the call. That is, the initial volume level is 3 for the next call.
Default 1
Tones
When receiving a message, the phone will play a warning tone. You can customize tones or select specialized tone
sets (vary from country to country) to indicate different conditions of the IP phone.
Topics
Supported Tones
Tones Configuration
Supported Tones
The default tones used on the phones are the US tone sets. Available tone sets for phones:
l
Australia
l
Austria