Yealink W80, Руководство администратора

Страница: 134 / 260

Administrator’s Guide for W80 DECT IP Multi-Cell System
131
Parameter voice.tone.dial <y0000000000xx>.cfg
Description
It customizes the dial tone.
tone list = element[,element] [,element]…
Where
element = [!]Freq1[+Freq2][+Freq3][+Freq4] /Duration
Freq : the frequency of the tone (ranges from 200 to 4000 Hz). If it is set to 0 Hz, it means the tone is
not played.
Duration : the duration (in milliseconds) of the dial tone, ranges from 0 to 30000ms.
You can configure at most eight different tones for one condition, and separate them by commas. (for
example, 250/200,0/1000,200+300/500,200+500+800+1500/1000).
If you want the IP phone to play tones once, add an exclamation mark “!” before tones (for example,
!250/200,0/1000, 200+300/500,200+500+800+1500/1000).
Note : It works only if “voice.tone.country” is set to Custom.
Permitted
Values
String
Default Blank
Web UI Settings > Tones > Dial
Parameter voice.tone.ring <y0000000000xx>.cfg
Description
It customizes the ringback tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note : It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set
it to 0.
Permitted
Values
String
Default Blank
Web UI Settings > Tones > Ring Back
Parameter voice.tone.busy <y0000000000xx>.cfg
Description
It customizes the tone when the callee is busy.
The value format is Freq/Duration. For more information on the value format, refer to the parameter
“voice.tone.dial”.
Note : It works only if “voice.tone.country” is set to Custom. If you want to disable this warning tone, set
it to 0.
Permitted
Values
String
Default Blank
Web UI Settings > Tones > Busy
Parameter voice.tone.callwaiting <y0000000000xx>.cfg
Description
It customizes the call waiting tone.
The value format is Freq/Duration. For more information on the value format, refer to the parameter