Yealink W80, Руководство администратора

Страница: 192 / 260

Call Features
189
Web UI
Settings > Dial Plan > Block Out > Account
[1]
X is from 1 to 10.
Example: Adding Replace Rules Using a Replace Rule File
The following example shows the configuration for adding replace rules.
Customize the replace rule template file and place this file to the provisioning server “http://192.168.10.25”.
Example
dialplan_replace_rule.url = http://192.168.10.25/DialPlan.xml
After provisioning, the rules defined in this file are added to the IP phone, and you can use the replace rules on the
phone.
Emergency Dialplan
You can dial the emergency telephone number (emergency services number) at any time when the IP phone is
powered on and has been connected to the network. It is available even if your phone keypad is locked or no SIP
account is registered.
Yealink phones support emergency dialplan.
Emergency Dial Plan
You can configure the emergency dial plan for the phone (for example, emergency number, emergency routing).
The phone determines if this is an emergency number by checking the emergency dial plan. When placing an emer-
gency call, the call is directed to the configured emergency server. Multiple emergency servers may need to be con-
figured for emergency routing, avoiding that emergency calls could not get through because of the server failure. If
the phone is not locked, it checks against the regular dial plan. If the phone is locked, it checks against the emer-
gency dial plan.
Topic
Emergency Dialplan Configuration
Emergency Dialplan Configuration
The following table lists the parameters you can use to configure emergency dialplan.
Parameter dialplan.emergency.enable <y0000000000xx>.cfg
Description It enables or disables the Emergency dialplan feature.
Permitted
Values 0 -Disabled
1 -Enabled
Default 1
Parameter dialplan.emergency.asserted_id_source <y0000000000xx>.cfg
Description
It configures the precedence of the source of emergency outbound identities when placing an emer-
gency call.
Note : If the obtained LLDP-MED ELIN value is blank and no custom outbound identity, the PAI header
will not be included in the SIP INVITE request. It works only if “dialplan.emergency.enable” is set to 1
(Enabled).
Permitted
Values
ELIN -The outbound identity used in the P-Asserted-Identity (PAI) header of the SIP INVITE request is
taken from the network using an LLDP-MED Emergency Location Identifier Number (ELIN). The cus-
tom outbound identity configured by “dialplan.emergency.custom_asserted_id” will be used if the
phone fails to get the LLDP-MED ELIN value.