YATO YT-82161, Оригинальное руководство пользователя

Страница: 13 / 125

13
O R I G I N A L I N S T R U C T I O N S
EN
TOOL DESCRIPTION
The wet polisher is a power tool designed for polishing materials such as porcelain tiles, granite, marble and other types of natural
stone using wet polishing pads selected according to the material to be processed. Wet polishing allows for reducing dusting in
the work area and extending the life of the polishing pads. Under no circumstances must the tool be used for processing materials
other than those mentioned above, e.g. for grinding wood. The correct, reliable, and safe operation of the polisher depends on its
proper use, so before using the polisher:
Read the entire instructions manual before the fi rst use of the tool and keep it for future reference.
Always use an eye guard!
Do not use polishing discs and guards with a maximum permissible speed of less than 80 m/s!
Do not use polishing discs or guards with a maximum permissible speed lower than the speed of the tool.
The supplier is not liable for any damage resulting from failure to observe the safety instructions and recommendations contained
in the instructions manual.
ACCESSORIES
The polisher is supplied with the following accessories:
- polishing disc
- polishing pad
- disc guard
TECHNICAL DATA
Parameter Unit Value
Catalogue No. YT-82161
Mains voltage [V~] 220-240
Mains frequency [Hz] 50/60
Rated power [W] 1300
Rated speed [min
-1
] 1300 – 4200
Disc diameter [mm] 100
Spindle tip M14
Weight [kg] 2.4
Water connector diameter [ ″ /mm] 1/4 ″ /6.35
Max. inlet water pressure [MPa] 0.5
Noise level
- sound pressure L
pA
± K
pA
[dB (A)] 85.0 ± 3.0
- power L
wA
± K
wA
[dB (A)] 93.0 ± 3.0
Vibration level a
h,p
± K [m/s
2
] 5.58 ± 1.5
Insulation class I
Protection rating IP20
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Note! The vibration emission during tool operation may di ff er from the declared value, depending on the manner the tool is used.
Note! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of use (in-
cluding all parts of the work cycle, such as the time when the tool is switched o ff or idle and the activation time), must be speci fi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and speci fi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term “power tool” used in warnings applies to all tools driven by power both wired and wireless.