YATO YG-03020, Руководство пользователя

Страница: 9 / 60

9
O R I G I N A L I N S T R U C T I O N S
GB
PRODUCT CHARACTERISTICS
Planetary mixer is used for preparing the food. Thanks to high power and capacious bowl (kneading-trough) it is possible to mix
food products quickly and easily. Rotating planetary mechanism of the agitator makes the food is thoroughly mixed in the product
bowl. Correct, reliable and safe operation of the device depends on proper operation, therefore:
Before starting product operation, please read this manual and keep it.
The supplier does not assume any liability for damages resulting from failure to follow safety regulations and recommendations
speci fi ed in this manual.
EQUIPMENT
The product is delivered as complete, but it requires some preparatory activities before the start of work, described later in this
user manual.
The product is delivered along with: a bowl (kneading-trough) and three types of agitators.
GENERAL USE RECOMMENDATIONS
Note! Read all instructions below. Failure to observe them may lead to electric shock, fi re or
body injuries.
ADHERE TO INSTRUCTIONS BELOW
Product is designed for professional use and should be operated by properly quali fi ed per-
sonnel.
The product is intended only for mixing of defrosted food products. Food products before
placing them in the bowl should be defrosted and prepared for mixing. If the texture of food
products does not allow for its easy mixing, it should be prepared before placing it in the bowl,
for example it should be minced.
Do not exceed the maximum capacity of the bowl. Observe indicators and read all informa-
tion regarding the maximum capacity of the bowl. It should be taken into account that during
mixing the centrifugal force can raise the level of mix in the bowl. When mixing, some prod-
ucts increase their volume even several times by mixing with air bubbles.
Recommendations for the product transportation and installation
NOTE! Product installation and connecting can be done only by quali fi ed personnel.
The product should only be transported in operating position. Avoid any shocks during the
transport.
Product can be placed only on a hard, fl at, level and non- fl ammable surface. Substrate
should withstand the weight of appliance itself together with foodstu ff s put inside.
Provide proper ventilation at the place of installation of the product, none vent may be cov-
ered. Provide at least 10 cm breathing-space around the product and at least 30 cm over the
product. This will allow proper product ventilation. Do not place any objects upon the product.
It is forbidden to drill any hole in the product, nor any other product modi fi cation not described
herein.
Place of product installation should be selected as to avoid any source of heat such as fur-
naces, heaters or in the vicinity of open fl ame. Place of installation of the product should be