YASKAWA SI-N3/V, Техническое руководство

Страница: 87 / 102

10 General Class Objects
YASKAWA SIEP C730600 84G DeviceNet Technical Manual 87
Drive Fault Code (Dec.)
(MEMOBUS/Modbus #0080 (Hex.))
DeviceNet Fault Code (Hex.) Description
32 3210 oH4 [Motor Overheat Fault (PTC Input)]
33 7500 CE [Modbus Communication Error]
34 7500 bUS [Option Communication Error]
37 8321 CF [Control Fault]
38 8313
SvE [Zero Servo Fault]
Note:
This fault is not displayed on GA500 or FP605 drives.
39
9000 EF0 [Option Card External Fault]
40 8000 FbL [PID Feedback Loss]
41 8000 UL3 [Undertorque Detection 1]
42 8000 UL4 [Undertorque Detection 2]
43 8000 oL7 [High Slip Braking Overload]
50 8000
dv1 [Z Pulse Fault]
Note:
This fault is not displayed on GA500 or FP605 drives.
51
8000
dv2 [Z Pulse Noise Fault Detection]
Note:
This fault is not displayed on GA500 or FP605 drives.
52
8000
dv3 [Inversion Detection]
Note:
This fault is not displayed on GA500 or FP605 drives.
53
8000
dv4 [Inversion Prevention Detection]
Note:
This fault is not displayed on GA500 or FP605 drives.
54
8000 LF2 [Output Current Imbalance]
55 8000
STo [Safe Torque OFF]
Note:
When using GA500, GA700, GA800, and FP605 drives, “ STPo ”
(Motor Step-Out Detected) will be shown.
56
7000
PGoH [Encoder (PG) Hardware Fault]
Note:
This fault is not displayed on GA500 drives.
59
1000 SEr [Speed Search Retries Exceeded]
65 8000 FbH [Excessive PID Feedback]
66 9000 EF1 [External Fault (Terminal S1)]
67 9000 EF2 [External Fault (Terminal S2)]
68 8000 oL5 [Mechanical Weakening Detection 1]
69 8000 UL5 [Mechanical Weakening Detection 2]
70 5000 CoF [Current Offset Fault]
73 8000 dWFL [DriveWorksEZ Fault]
77 5000
voF [Output Voltage Detection Fault]
Note:
This fault is not displayed on GA500 or FP605 drives.
78
7000 rF [Braking Resistor Fault]
79 7000 boL [BrakingTransistor Overload Fault]
- 1000 Other faults