30
4. OPERATION PROCEDURES
Building Programs
6. End programmed operation
An alert will sound when program ends.
Top display will show "END", indicating that program has finished.
Press the START/STOP key to return to initial setting screen.
Timer function:
Maximum setting for timer is 999 hours and 50 minutes.
Timer can be set in increments of one minute, under 99 hours and
59 minutes.
Setting increments are 10 minutes after 100 hours.
When the
▼▲ keys are held down, values will advance rapidly.
Press repeatedly for incremental adjustment.
Editing or confirming
settings
Press the FIXED TEMP key to edit a program, confirm setting values
or return to a previous step. Display will return to editing and
confirmation screen.
For each time FIXED TEMP key is pressed, screen will go back one
step.
Note:
Editing and confirmation must be done on program setting
screen.
Wait status in
programmed operation
Succeeding steps will not start if chamber temperature fails to
reach, or if it exceeds objective temperature. DKN-C series units,
however, are programmed to begin succeeding steps when
chamber temperature is within ±3
C of objective temperature.
