13
3. COMPONENT NAMES AND FUNCTIONS
Main Unit
No.
Panel Item
Description
1
RUN/STOP Key
Press to start or stop an operation.
2
Up/Down Arrow Keys
Press repeatedly to increase or decrease setting value incrementally.
Press and hold to increase or decrease setting value perpetually.
3
ENTER Key
Press to finalize setting.
4
FIXED TEMP Key
Press to select FIXED TEMPERATURE mode.
5
TIMER Key
Press to select timed operation. Quick Auto Stop, Auto Stop or Auto Start
modes may be selected.
6
PROGRAM Key
Press to begin creating programs or to select programmed operation.
3 programs with a total of 6 patterns may be set. (See P.25)
7
SUBMENU Key
Press to enter overheat prevention temp setting, calibration offset, keypad lock,
and program repeat menus.
8
HEATER Indicator Lamp
Illuminates when heater is on and drawing power.
9
ALARM Indicator Lamp
Illuminates when an error occurs (accompanying alarm tone sounds).
10
AUTO STOP Indicator
Lamp
Illuminates while Auto Stop operation is in progress. Flashes while setting Quick
Auto Stop or Auto Stop modes.
11
AUTO START Indicator
Lamp
Illuminates while Auto Start operation is in progress. Flashes while setting.
12
FIXED TEMP Indicator
Lamp
Illuminates while Fixed Temperature operation is in progress. Flashes while
setting.
13 PROGRAM Indicator Lamp
Illuminates while Programmed operation is in progress. Flashes while setting.
14
Main Display
(Temp reading display)
Shows current chamber temperature, setting characters and error information.
15
Subdisplay
(Temp setting display)
Shows temperature setting, timer setting and remaining time.
16
Overheat Prevention
Display
Shows overheat prevention temperature limit setting.
17
Main
Circuit Breaker
(MCB)
Flip up or down to turn unit ON or OFF respectively.
*
