23
4. OPERATION PROCEDURES
Auto Stop Mode
To stop/terminate auto stop operation manually
Operation stops automatically when timer reaches 0.00. An
accompanying alarm sounds for approximately five seconds
after operation terminates.
Center display shows
, indicating end of operation,
with AUTO STOP lamps illuminated. Press the RUN/STOP
key at any time during operation or after operation ends, to
terminate auto stop operation mode. Displays will return to
initial settings screen.
Editing or confirming
settings
Changing temperature setting or timer setting during operation
can be done by pressing the TIMER key. Use the
▼▲ keys
to change the setting values. Press the ENTER key when
changes have been entered as desired.
Press the
▼ key at any time thereafter to see temperature
setting, operation mode and remaining time in the center
display.
Note:
Remaining time may be seen
(center display)
with decimal point constant as an indicator that unit is in wait
status while temperature rises or falls toward an objective
temperature. When decimal point begins flashing, timer is
counting down.
