3
1. SAFETY PRECAUTIONS
Warnings & Cautions
Warning
NEVER operate equipment near combustible gases/fumes
Do not install or operate DKN-C series unit near flammable or explosive gases/fumes. Unit is
NOT fire or blast resistant. Negligent use could cause a fire or explosion.
See
“List of Hazardous Substances” (P.52)
ALWAYS ground equipment
Always ground equipment properly to avoid electric shock.
DO NOT operate equipment when abnormalites are detected
In the event that smoke or any unusual odor begins emitting from unit, or if any other abnormalities
are detected, terminate operation immediately, turn off main power switch (Main Circuit Breaker
-
“MCB”) and disconnect power cable. Continued operation under such conditions may result in
fire or electric shock.
DO NOT operate equipment with power cable bundled or tangled
Operating unit with the power cable bundled or otherwise tangled, may cause power cable to
overheat and/or catch fire.
DO NOT damage power cable
Damaging the power cable by forcibly bending, pulling or twisting may cause fire or electric shock
to the operator.
NEVER process explosive or combustible substances
Attempting to process/use explosive or combustible substances in/near unit may cause explosion
or fire. See
“List of Hazardous Substances” (P.52)
DO NOT touch hot surfaces.
Some surfaces on this unit become extremely hot during operation. Exercise vigilance in order to
avoid getting burned.
NEVER disassemble or modify the equipment
Attempting to dismantle or modify unit in any way, may cause malfunction, fire or electric shock.
DO NOT insert multiple power cables into a single outlet
Inserting multiple cords into a single outlet, using branch outlets or extension cords, may cause
power cable to overheat and/or catch fire. Other issues may include a drop in voltage, which may
affect performance, resulting in failure to control or maintain proper temperature.
