Yamaha YZ85( P) /LC, Руководство по эксплуатации для владельца

Страница: 190 / 508

3 - 34
INSP
ADJ
●
Check the steering stem by turning it lock
to lock. If there is any binding, remove the
steering stem assembly and inspect the
steering bearings.
●
Install the upper bracket
5
, washer, steer-
ing stem nut
6
, handlebar
7
, handlebar
upper holder
8
and number plate
9
.
NOTE:
●
The upper handlebar holder should be
installed with the punched mark
a
for-
ward.
●
Insert the end of fuel breather hose
0
into
the hole of the steering stem.
CAUTION:
First tighten the bolts on the front side of
the handlebar holder, and then tighten
the bolts on the rear side.
T
R
.
.
Steering stem nut:
125 Nm (12.5 m • kg, 90 ft • lb)
Handlebar upper holder:
27 Nm (2.7 m • kg, 19 ft • lb)
Pinch bolt (upper bracket):
22 Nm (2.2 m • kg, 16 ft • lb)
Number plate:
7 Nm (0.7 m • kg, 5.1 ft • lb)
5PA30760
STEERING HEAD INSPECTION AND ADJUSTMENT