Yamaha XSR900 2022, Руководство по обслуживанию

Страница: 561 / 726

9-155
P0 33 5
4. Installed condition of crankshaft position sensor.
• Check for looseness or pinching.
Refer to “GENERATOR AND STARTER CLUTCH” on page 5-37.
• Check the gap (0.85 mm (0.03 in)) between the crankshaft position sensor and the generator rotor.
5. Defective crankshaft position sensor.
• Check the crankshaft position sensor.
Refer to “CHECKING THE CRANKSHAFT POSITION SENSOR” on page 8-45.
Is resistance
∞ Ω
?
YES
→
Go to step 4.
NO
a. Replace the wire harness.
b. Crank the engine, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to step 4.
Is check result OK?
YES
→
Go to step 5.
NO
a. Reinstall or replace the sensor.
b. Crank the engine, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to step 5.
Gy B
Gy B
Gy L L V P P/W Lg/L O/W Y/L L/B
B/L B/L Br/W Gy/G G/L Br/L B/Y L/W
W/Y W/G G/W G/W Lg/B L/W L/Y
L/W W W L/W B B L/B L/B Y/B Y/B
L/R L/R L/R L/R B/L B B/L B B B B B
A
B
1
1
3
2