Yamaha XSR900 2022, Руководство по обслуживанию

Страница: 454 / 726

9-48
SELF-DIAGNOSTIC FUNCTION AND DIAGNOSTIC CODE TABLE
“P0560,
P0563”
[P0560] Battery charging voltage is ab-
normal. Poor charging performance (dis-
charged condition). Vehicle system
power voltage is abnormal. (Regulator is
not operated properly or battery is not
charged properly.)
[P0563] Battery charging voltage is ab-
normal. Charging voltage is not within
range (overcharged condition). Vehicle
system power voltage is abnormal. (Reg-
ulator is not operated properly or battery
is not charged properly.)
Able Able —
“P0564”
Cruise control setting switch “RES+”:
open or short circuit is detected. Normal
signal is not sent to ECU.
Cruise control setting switch “SET–”:
open or short circuit is detected. Normal
signal is not sent to ECU.
Able Able 80, 81
“P056C”
Front brake light switch: open or short cir-
cuit is detected. Normal signal is not sent
to ECU.
Rear brake light switch: open or short cir-
cuit is detected. Normal signal is not sent
to ECU.
Able Able 82, 83
“P0601”
ROM error. Internal malfunction in ECU.
(When this malfunction is detected in the
ECU, the DTC might not appear on the
tool display.)
Unable Unable —
“P0606”
Processor error. Internal malfunction in
ECU. (When this malfunction is detected
in the ECU, the DTC might not appear on
the tool display.) Able/Unable
(depending
on the situa-
tion)
Able/Unable
(depending
on the situa-
tion)
—
“P062F”
EEPROM DTC: an error is detected
while reading or writing on EEPROM.
Able/Unable
(depending
on the situa-
tion)
Able/Unable
(depending
on the situa-
tion)
60
“P0638”
YCC-T drive system: malfunction detect-
ed.
Able/Unable
(depending
on the situa-
tion)
Able/Unable
(depending
on the situa-
tion)
—
“P0657”
Fuel system voltage: incorrect voltage
supplied to the injector, fuel pump and re-
lay unit.
Able Able 09, 50
“P0914”
Gear position sensor: signal stuck and
sensor signal does not change.
Able Able —
“P0915”
Gear position sensor: out of control sig-
nal range and normal signal is not re-
ceived from the gear position sensor to
ECU.
Able Able —
DTC Symptom
Fail-safe system
Diagnos-
tic code
Starting the
engine
Driving the
vehicle