Yamaha XSR900 2022, Руководство по обслуживанию

Страница: 513 / 726

9-107
P0107, P0108
• Short circuit check
TIP
Disconnect the ECU related connectors before checking.
Refer to “PARTS CONNECTED TO THE ECU” on page 9-4.
Ground short circuit check “A”
Between ECU coupler “3” and joint coupler cap
“2”
[P0108] black/blue–black/blue
Between ECU coupler “3” and intake air pres-
sure sensor 1 coupler “1” [P0108] blue–blue
[P0107, P0108] pink/white–pink/white
Between intake air pressure sensor 1 coupler
“1” and joint coupler “2”
[P0108] black–black
Is resistance 0
Ω
?
YES
→
Go to “Short circuit check”.
NO
a. Replace the wire harness.
b. Turn the main switch to “ON”, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to “Short circuit check”.
Between intake air pressure sensor 1 coupler
“1” and ground blue–ground
pink/white–ground
Gy L L V P P/W O/W Y/L L/B
B/L B/L Br/W Gy/G Br/L B/Y L/W
W/Y W/G G/W G/W Lg/B L/W L/Y
B P / W L
L/B W L/B L/B L/B B L/B L/B L/B L/B
L/B L/B L/B L/R B/L B B/L B B B B B
3
2
1