Yamaha XSR900 2022, Руководство по обслуживанию

Страница: 625 / 726

9-219
P0916, P0917
3. Wire harness continuity.
• Disconnect the gear position sensor coupler “1” and ECU coupler “2”.
• Open circuit check
• Short circuit check
TIP
Disconnect the ECU related connectors before checking.
Refer to “PARTS CONNECTED TO THE ECU” on page 9-4.
Ground short circuit check “A”
Lines short circuit check “B”
Between gear position sensor coupler “1” and
ECU coupler “2”
black/blue–black/blue
green/white–green/ white
blue–blue
Is resistance 0
Ω
?
YES
→
Go to “Short circuit check”.
NO
a. Replace the wire harness.
b. Turn the main switch to “ON”, and then check the DTC using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 7, and complete the service.
NO
→
Go to “Short circuit check”.
Between gear position sensor coupler “1” and
ground green/white–ground
blue–ground
Gear position sensor coupler “1”
black/blue–any other coupler terminal
green/white–any other coupler terminal
blue–any other coupler terminal
ECU coupler “2”
black/blue–any other coupler terminal
green/white–any other coupler terminal
blue–any other coupler terminal
Gy L L V P P/W Lg/L O/W Y/L L/B
B/L B/L Br/W Gy/G G/L Br/L B/Y L/W
W/Y W/G G/W G/W Lg/B L/W L/Y
L G/W B/L
1
2