Yamaha XSR900 2022, Руководство по обслуживанию

Страница: 598 / 726

9-192
P0564
5. Defective cruise control setting switch.
• Replace the handlebar switch (left).
Refer to “HANDLEBAR” on page 4-60.
• Turn the main switch to “ON”.
• Push the “RES+” side and “SET–” side of the cruise control setting switch, and then check the DTC
using the malfunction mode of the YDT.
6. Check the fuse. (main fuse, cruise control fuse)
7. Wire harness continuity.
• Open circuit check
• Disconnect the main fuse “4”, ignition fuse “5”, main switch coupler “6”, cruise control fuse “1”, han-
dlebar switch coupler (left) “2” and ECU coupler “3”.
Is it in the “Recovered” condition?
YES
→
Go to step 10, and complete the service.
NO
→
Go to step 5.
Is it in the “Recovered” condition?
YES
→
Go to step 10, and complete the service.
NO
→
Go to step 9.
Is check result OK?
YES
→
Go to step 7.
NO
a. Replace the fuse.
b. Turn the main switch to “ON”.
c. Push and release the “SET–” side of the cruise control setting switch, and then check the DTC
using the malfunction mode of the YDT.
Is it in the “Recovered” condition?
YES
→
Go to step 10, and complete the service.
NO
→
Go to step 7.
Between main fuse holder “4” and main switch
coupler “6”
red–red
Between main switch coupler “6” and ignition
fuse holder “5”
brown/blue–brown/blue
Between ignition fuse holder “5” and cruise con-
trol fuse holder “1”
red–red/white
Between cruise control fuse holder “1” and han-
dlebar switch coupler (left) “2”
yellow/white–yellow/white
Between handlebar switch coupler (left) “2” and
ECU coupler “3”
green/blue–green/blue