59
SET MENU
AD
V
A
N
C
ED
OPERA
T
ION
Eng
lish
Surround left/right speakers
SURR L/R SP
Choices: NONE,
SML
, LRG
• Select “NONE” if you do not have surround speakers.
This will set the unit to the Virtual CINEMA DSP
mode (see page 39) and automatically set the surround
back speaker setting (SURR B L/R SP) to “NONE”.
• Select “SML” if you have small surround left and right
speakers. The low-frequency signals of the surround
channel are directed to the speakers selected in LFE/
BASS OUT.
• Select “LRG” if you have large surround left and right
speakers or if a rear subwoofer is connected to the
surround speakers. The entire range of the surround
channel signal is directed to the surround left and right
speakers.
Surround back speakers
SURR B L/R SP
Choices: LRGx2, LRGx1,
SMLx2
, SMLx1, NONE
• Select “LRGx2” if you have 2 large surround back
speakers. The unit directs the entire range of the
surround back channel signal to the surround back
speakers.
• Select “LRGx1” if you have a large surround back
speaker. The unit directs the entire range of the
surround back channel signal to the left surround back
speaker.
• Select “SMLx2” if you have 2 small surround back
speakers. The low-frequency signals of the surround
back channels are directed to the speakers selected in
LFE/BASS OUT.
• Select “SMLx1” if you have a small surround back
speaker. The low-frequency signals of the surround
back channel are directed to the speakers selected in
LFE/BASS OUT, and the rest of the frequency signals
are directed to the left surround back speaker.
• Select “NONE” if you do not have a surround back
speaker. The unit directs all of the surround back
channel signal to the surround left and right speakers.
If you select “LRGx1” or “SMLx1”, connect the speaker to the
left SURROUND BACK speaker terminals.
Presence speakers
PRESENCE SP
Choices:
NONE
, YES
• Select “YES” if you have presence speakers.
• Select “NONE” if you do not have presence speakers.
LFE/bass out
LFE/BASS OUT
Low-frequency (bass) signals can be directed to the
subwoofer and/or the front left and right speakers
according to the characteristics of your system. This
setting also determines the routing of the LFE (low-
frequency effect) signals found in Dolby Digital or DTS
sources.
Choices:
SWFR
(subwoofer), FRNT, BOTH
THX recommendation: SWFR
• Select “SWFR” if you connect a subwoofer. LFE and
low-frequency signals from other channels are directed
to the subwoofer according to the speaker settings.
• Select “FRNT” if you do not use a subwoofer. LFE and
low frequency signals from other channels are directed
to the front speakers according to the speaker settings
(even if you have previously set front speakers to
SML).
• Select “BOTH” if you connect a subwoofer and you
want to output low-frequency signals from front
channels to both the front speakers and subwoofer.
LFE and low-frequency signals from other channels
are also directed to the subwoofer according to the
speaker settings. Use this function to reinforce low-
frequency signals using the subwoofer when playing
back sources such as CDs.
Note
NONE
[
SML
LRG
SURR L/R SP
SMLx1
[
SMLx2
SURR B L/R SP
[
NONE
YES
PRESENCE SP
[
SWFR FRNT BOTH
LFE/BASS OUT
