Yamaha MM700F, Руководство по обслуживанию

Страница: 406 / 589

8-1
– +
ELEC
ON
OFF
R Br / L L / Y L / B
R Br / L
L / Y L / B
SWITCH INSPECTION
ELECTRICAL
SWITCH INSPECTION
SWITCH INSPECTION
Use a pocket tester to check the terminals for conti-
nuity. If the continuity is faulty at any point, replace the
switch.
Pocket tester:
90890-03112, YU-03112
NOTE:
•
Set the pocket tester to “0” before starting a test.
•
When testing the switch for continuity the pocket
tester should be set to the “
×
1”
Ω
range.
•
When checking the switch turn it on and off a few
times.
INSPECTING A SWITCH SHOWN IN THE
MANUAL
The terminal connections for switches (main switch,
handlebar switch, engine stop switch, light switch,
etc.) are shown in a chart similar to the one on the left.
This chart shows the switch positions in the column
and the switch lead colors in the top row.
For each switch position, “ ” indicates the
terminals with continuity.
The example chart shows that:
1
There is continuity between the “Blue/Yellow and
Blue/Black” leads when the switch is set to “OFF”.
2
There is continuity between the “Red and Brown/
Blue” leads when the switch is set to “ON”.
SCH8010
SCH8020