Yamaha F150B, Руководство по обслуживанию

Страница: 83 / 458

3-6
Outboard motor mount
0
1
2
3
4
5
6
7
8
9
10
A
11. Remove the steering retainer, and install
a hydraulic steering cylinder and steering
cable following the manufacture’s
recommendation before the outboard
motor is mounted.
Outboard motor mount
Proper mounting of the outboard motor will
mean better performance, maximum reliabil-
ity, and maximum customer satisfaction. This
chapter contains the specifications neces-
sary for the outboard motor mounting, and
may vary slightly depending on application.
When mounting the outboard motor, also
make sure the outboard motor has the clear-
ance to provide full movement, from both
PORT to STBD, as well as during trim and tilt
functions. See “Dimensions” (3-2).
1. Set the outboard motor on the vertical
centerline of the boat transom.
A
No strakes hull
B
Strakes hull
C/L: Centerline of the transom
TIP:
Double check the measurement distance to
verify that the vertical centerline is straight.
The distance
a
and
b
are equal length.
Also,
c
and
d
are too.
f
a b
c d
C/L
A
a b
c d
C/L B
Uncrate procedure / Outboard motor mount