44
2. Rotate the
DIAL
knob to select the category [
C1
] to [
C5
] and then press the
DIAL knob.
Displays the node and room lists.
• For details on registering nodes and rooms, see “
node or room in the category list
• Connection destinations are displayed from the room list and then node list.
• On the connection destination room columns, the number of activities (the
number of nodes connected to each room) appears on the right side.
Items may be listed in order according to the number of activities, or access
history from Setup Menu → [
WIRES-X
] → [
2 SEARCH SETUP
] (FTM-300D) or
Setup Menu → [
62 SEARCH SETUP
] (FTM-200D).
ALL
SEARCH & DIRECT
C1:TOKYO
C2:FISHING
C3:
– – – – – – – – – – – – – – –
–
C4:
– – – – – – – – – – – – – – –
–
CATEGORY
3. Rotate the DIAL knob to select the node or room and then press the DIAL knob
to start a connection.
• Once connection is successfully established, “
Connected
” will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen
returns to the list of nodes and rooms.
CQ-JAPAN 123
JA1YOE-TKY-ROOM 42
C1:TOKYO
④
Connecting to the node or room you have most recently connected
1. If a node or room has been connected on the Internet before, the last connected
node or room will blink at the bottom of the screen.
• Rotate the DIAL knob to select the blinking node or room and press the DIAL
knob or the
PTT
switch to start connection.
• If connection is unsuccessful, an error message appears and the name flash-
es again.
JQ1YBG-ND Shinagawa-
JA1YOE-ROOM12345
SEARCH & DIRECT
⑤
Entering the DTMF ID number (5 digits) of the node or the room
1. Press and hold the [
#
] key on the microphone.
Displays the DTMF ID input screen.
2. Enter the 5-digit DTMF ID.
3. Press the [
#
] key on the microphone to start a connection.
• Once connection is successfully established, “
Connected
” will appear on the
LCD.
• If connection is unsuccessful, an error message appears and the screen re-
turns to the DTMF ID input screen.
• Press the [
] key on the microphone to cancel the DTMF input screen.
JQ1YBG-ND Shinagawa-
SEARCH & DIRECT
FTM-100D
There are four ways to connect to a digital room or a digital node on the Internet.
①
Searching from the node & room lists
(
)
②
Searching the node ID or the room
)
③
Connecting to the node or room you have most recently connected
(
④
Entering the DTMF ID number (5 digits) of the node or the room
)
Another C4FM digital transceiver accessing the portable node frequency and using the WIRES-X DG-ID number may
also connect a node or a room. For details, refer to the
Operating Manual (WIRES-X Edition)
of each transceiver.
①
Searching from the node & room lists
1. Press the [
BAND
] (MHz) key.
Displays the category list.
